PRODUCTS
Back to listsMullen Type Bursting Strength Tester
Model
ML-100KG-PD
Reference standard
JIS L-1096、1018;ISO 13938-1、2758、2759、3303;
ASTM 3786;GB 7742 standards
Use/Good point
This apparatus is used to measure the textile, paper and other products’ resistance when broken by an external force at the same time from multi-angles, namely it is called the bursting strength.
When specimen fixed at the chuck is pressed up and broken by rubber diaphragm giving oil pressure, its resistance value is digitally displayed.
Obtain the bursting strength (MPa) by the formula below,
Bursting strength (MPa) = A-B
Where, A = strength of rubber diaphragm to burst specimen (MPa)
B = strength of rubber diaphragm when clamp is removed (MPa)
*The digital display save time, meanwhile there is no artificial error.
*Hydraulic cylinder clamping way is high efficient.
*The exchange of unit between(kPa)and(kgf/cm²)can be done。
*The minimum pressure display is 5kPa。 ※kPa = kN/m²
Remarks
【ACCESS.】
Low pressure rubber diaphragm 10pcs
Glycerol 1bot
Mounting tool 1set
Introduction manual 1copy
Spec
ML-100KG-PD | |
---|---|
Measuring range | 0~7000 kPa |
Clamping method | Hydraulic cylinder(Two hands push button) |
Pressure display | LED (Min.:5 kPa) |
Oil supply speed | 98±4 ml/min |
Clamp area | φ30.5±0.3 mm |
Pressure | Button switch(pressure-stop-reduction) |
Power source | AC100V 50/60Hz |
Dimensions | W 680×D 350×H 400 mm |