PRODUCTS
Back to listsHydraulic Tester for Catheter Tube 【end of manufacture】
Model
CT-3MPA
Reference standard
ISO－10555-2：1997
Spec
| CT-3MPA | |
|---|---|
| Conduit length | 120cm（basic moder） |
| Conduit diameter | 1mmappr.（area of section：7.85×10-3cm2） |
| Maximum Pressurization speed | 30Kgf/cm2/min(2940kPa /min) |
| Maximum pressure | 100Kgf/cm2 (9800kPa) |
| Push-out water dosage | max.5cc、min1.13×10^-5cc |
| Extrusion cilynder | inner6mmφ、stroke100mm |
| Electromotor | impulse motor(Microstep operation) |
| Power source | AC 220V 50Hz |
| Outside dimension(approximately) | W730×D300×H500mm |