PRODUCTS

Back to lists

Automatic Cantilever Softness Tester

Model

CAN-1MCC

Reference standard

JIS L-1096、L-1912、L-1913
ISO 9073-7
ASTM D 5732
GB/T 18318-01

Use/Good point

This apparatus is a dual-purpose type for 41.5°and 45° test methods. The forepart of smooth horizontal stand as the center of axis can make the slope move up and down, so as to change the slope angle. Trough the switch of screws, the angle can be changed simply, and show out automatically on display screen.
Two kinds of test methods are similar in operation program, except the difference in slope angle.
According to the different test methods, choose the corresponding determination condition on display, just like 1.sample length; 2.sliding speed; 3.sample weight; and 4.sample number, then it carried out automatically, after setting sample’s both sides , as well as outside and inside. Test results of [extension length], [bending length], [mean value], [standard bias], [max.(mm)], [min.(mm)], and [softness (mN•m)], are all printed out.

Spec

 CAN-1MCC
Specimen sizeLength:150mm,200mm, 300mm Width:~25mm
Slope angle41.5°or 45° (switching way)
Sliding speed2mm/sec、5mm/sec、10mm/sec (preset on display)
Measuring range25-125mm : In case of sample length 150mm 25-175mm : In case of sample length 200mm 25-225mm : In case of sample length 250mm
Min. reading1mm-While measuring (on display) 0.1mm-When measurement is completed and print out.
Result readingLCD display and print out
DisplayLCD (4-digit)
USB interfaceComputer data output (Option)
PrinterThermal-micro printer (chart width: 58mm)
Power supplyAC 220V 50Hz
DimensionsApprox. W480×D270×H270mm weight:8kg approx.